( This Post Contains Affiliate Links and We May Receive A Small Commission on Purchases)

How To Clean Floor Grout Without Scrubbing

Homeowners like to grout their tiles because it leaves a lasting, durable, and beautiful effect. However, it is a big pain to clean it when it becomes moldy, dirty, or discolored. 

Most people are used to falling on their hands and knees to scrub their floor’s grout to keep it look beautiful and sparkling. Furthermore, there are other alternatives to make your grout beautiful and clean with minimum scrubbing.

When you formulate a suitable cleaning agent and apply it on the grout, rest assured it will be kept bright and new. However, it should be noted that for you to make your grout 100% clean, it may need a little scrubbing. Nevertheless, this article will provide effective techniques to help you clean your grout with minimal scrubbing.

11 Ways To Clean the Grout With Little Or No Scrubbing

i. First try the bleach on the tiles.

Chlorine-free bleach has excellent whitening and disinfecting effects. However, just like vinegar, it can cause damage to some kind of floor like tiles. So before you decide to use bleach on your floor, it advisable you first carry out a spot test. It’s best to use an area on the surface of the floor that is not visible such as the bottom corner. Hence if the bleach affects the color of your floor surface, it won’t be too visible.

ii. Use Chlorine Bleach in a Pinch

The sanitizing and disinfecting power of chlorine bleach is equally very strong. It can be helpful to remove dirts on grout. But then it can also be harmful to your floor. Since the grout is porous, bleach can even enter the subfloor surface and damage it as well. So you should use chlorine bleach as a last resort for those stubborn stains.

iii. Use bleach pen

Make use of a bleach pen if you are not too comfortable using bleach on your tiles. Besides, using a bleach pen helps you to be more precise in applying bleach so that it only enters the grout.

iv. Use of Baking Soda

You should create a thick paste prepared by mixing baking soda and water to clean grout. It is not only a simple way to clean grout, but it is also one of the best grout cleaners. Apply this paste to the grout using an old toothbrush and then brush gently to clean.

v. Add hydrogen peroxide

If baking soda itself doesn’t seem to be effective, then pour a little amount of hydrogen peroxide into it instead of water. The slightly corrosive properties of baking soda help remove impurities from the porous grout. Meanwhile, the hydrogen peroxide will act as a mild, non-toxic bleach. Also, a dash of dish soap can be added to the mixture to boost the cleansing powers.

A good ratio is ¼ cup of hydrogen peroxide, ½ cups of baking soda, and a teaspoon of dish soap. When the mix is applied on the grout, let it stand on it for about 10 minutes. This gives time for the dirt in the mixture to get loosened. Afterward, you should gently clean and wipe the surface with a damp cloth.

vi. Use boiling water

The use of boiling water is one of the easiest ways to clean grout on the floor. To begin, bring your kettle of water to a rolling boil. Then put a little amount of boiling water directly into the floor’s grout. 

Next, make use of a cleaning brush to clean the grout in a circular motion gently. This should be done in small patches so that the water does not have much time to cool. The heat will remove the impurities. After that, you can simply dry the excess water with a towel.

vii. Use an electric toothbrush.

You can use an electric toothbrush if you don’t like the elbow grease that comes with using a generic toothbrush to clean grout. Many of these electric or battery-operated brushes come with an extra brush that you can use specifically to clean the house. It’s similar to a tile grout cleaning machine.

viii. Mop the floor

After cleaning the grout, use a mild floor cleaner and a mop to wipe off the surface of the floor—this helps to remove dirt and dust embedded in the grout. After the grout has been cleaned, you may want to use a grout sealer on it, unless your grout is epoxy based. 

This will protect the grout from stains in the future, so you will not repeat the cleaning process. Also, ensure the floor is totally dry before applying the adhesive according to the manufacturer’s instructions. Thus your floor’s grout will become new again.

ix. Vacuum for Prevention

Another simple way to avoid the contamination of grout, in general, is to change the way the surface of tiles is cleaned. Wiping spreads only impurities and allows them to enter the porous grout. However, using a vacuum cleaner will help lift the dirt and remove it so it does not settle on the grout lines.

x. Sealing the Grout Lines

Cleaning the lines of grout is a physical process that is challenging. After you have the grout cleaned up, sealing it will further create a protective surface that helps prevent stains in the future. This equally makes it easier to keep it clean.

You must follow the manufacturer’s instructions carefully when applying the grout adhesive. Ensure your tile is clean and completely dry. Lastly, allow the sealant to cure completely before using the tiled area.

xi. Use Steam on your grout to restore its original white.

Start with the steam pressure on the lowest setting and work up to the higher one if necessary. Use the brush attachment for tough stains. No steam cleaners are used during the steam cleaning process. Instead, it uses steam and pressure to get rid of dirt and grime.

Why You Should Avoid Straight Vinegar

So how do you use the mix of vinegar and baking soda to clean the grout? Undoubtedly vinegar is a popular natural homemade cleaner. However, it is too acidic for it to be used in the cleaning of the grout. It should be noted that the vinegar contains acetic acid, which can cause corrosion on the grout over a long period. Hence, in this situation, you may want to avoid using it for cleansing.

Frequently Asked Questions

Can I consider using an Epoxy-Based Grout for Future Tiling

If you are re-tiling a surface, you may want to consider using an epoxy-based grout instead of the more traditional cement type. Although it is costly and harder to apply, nevertheless, it is much more durable and long-lasting. It is also almost stain-resistant, so you have to do a lot less cleaning work.

What takes stains out of grout?

You should mix a paste of two parts baking soda and one part water to allow it to sit overnight on grout stains. Afterward, use a nylon brush to scrub it and once you’re done, rinse with hot water. This is useful to get rid of stubborn stains on your floor grout.

What can I use instead of grout?

The caulk is based on silicone, acrylic, or latex, which is flexible and can help absorb movement while on the Other hand, grout can quickly get cracked. Caulk is used for waterproof joints, such as baths, showers, windows, etc. 

Does toothpaste clean grout?

Most people are not aware that toothpaste makes an effective cleanser for tile grout. Just apply some white, non-gel toothpaste on the floor’s grout. Then use a toothbrush to scrub it. Afterward, you rinse a cloth with liquid dish soap and water before you wipe it clean.

How do I get black stains out of my shower grout?

Mix equal parts bleach and bottled water with a spray bottle and spray it over the stained area to sit for a few minutes.

This helps to remove black spots that are formed by mold on non-porous surfaces, such as grout; go back and respray the area and use a scrubbing brush to wipe off the remaining stains.

Is white grout hard to clean?

If moisture or dirt are prevented from penetrating the grout, it brings these things to the surface, thus protecting the appearance of your lines. That’s to say; white grout remains beautiful, clean, and white. And any other colored grout looks just as good as new as long as it is protected against mold and other stubborn stains.

Final Thoughts

Finally, it doesn’t matter how hard you try to keep your kitchen and bathroom clean; they will always look dirty if the floors are plagued with unclean grout. It doesn’t matter whether it is caught up between the tiles in the shower or near the backsplash. 

However, before you spend any amount of money on cleaning products, you should consider this: you can mix your homemade cleaning solution, which is less toxic and cheaper than the store-bought variety. 

Also, you should make use of just a handful of ingredients already sitting under your kitchen sink. You will initially need to wear protective gloves – but after that, the cleanser is made in a little less than 10 minutes.