( This Post Contains Affiliate Links and We May Receive A Small Commission on Purchases)

How To Use A Steam Mop On Tiles

Steam mop is one of the most convenient and best household tools you can get today. Steam cleaners are ideal for cleaning floors and the surface of ceramic tiles. Similarly, it can quickly get rid of the sticky marks that ordinary floor cleaners mostly leave behind.

This gadget generates high-pressure steam. Hence they will not only clean your surfaces, but they will also disinfect them without the use of toxic chemicals. These aggressive substances can not only damage the grout ( dense fluid applied to fill gaps) but also the tile itself.

This article provides all you need to about maintenance of tile floor using a steam mop. Also, check out this post on how to handle steam mop not steaming issues.

How Often Can You Clean Your Floors With A Steam Mop?

Using steam to wash your tiles is an excellent alternative for your daily cleaning. For most people, this can mean steam mopping every weekend. Nevertheless, you should do this more often if your family is active or if people who visit carry more dirt outside the home than usual. You can also steam wash monthly and combine it with a powerful scrub.

How To Clean The Tiles With A Steam Mop

Here are the routines to follow for you to clean your tiles with a steam mop:

i. Scrutinize the area of the floor

It is not a matter of efficiency, but a general floor care routine. The steam mop should only be used on sealed floors, as excessive water or moisture can damage the surfaces of the floor. 

You should also never leave this cleaning gadget switched on and leave it unattended while doing something else. Besides, moisture can build up on the mop pad and damage the floor surface.

Nevertheless, a steam mop is safe to use on any type of flooring- linoleum, vinyl, ceramic or porcelain tile, and some hardwood and laminate flooring. 

Ensure you seek the advice of the manufacturer of floors for steam cleaning warnings. For instance, when laminate flooring is marketed as water-resistant, it is suitable for steam cleaning. On the other hand, other products may have a warning. 

It’s noteworthy to mention that steam mop can pass steam through the joints between laminated boards and damage the inner layer. However, waterproof laminates are usually made of special waterproof resins in the substrate, and it is ideal for cleaning with a steam mop.

ii. Sweeping and vacuuming

Ensure you vacuum the floor before using a steam mop. Alternatively, you can sweep if you don’t have a vacuum cleaner, but good suction will pull fluff, dust, and other surface debris out of cracks and prevent the mop from getting dirty. 

After you’ve vacuumed your floor, then you can use a steam mop to clean the tiles.There are a lot of steam mop tools with dual functions on the market. They prove very useful and work great, particularly for getting rid of small debris or areas without the need for a vacuum cleaner. 

But before cleaning the entire floor with a steam mop, the vacuum cleaner will remove much more dirt from the floor. This means less dirt on the pad of the mop and cleaner steam.

iii. Ensure you prepare the pads

To avoid leaving marks or smudging dirt when steaming floors, keep a few mop pads on hand so you can change them as needed. You can buy steam mop pads at affordable prices. 

Furthermore, they can wash well in the washing machine wash and can be hung to dry. Read the instruction manual for directives on how to care for your steam mop and accessories. Replacing the pad whenever it gets dirty ensures you maintain a clean steam mop.

iv. Make sure to wash the pads.

The steam mop is most likely to come with recommendations on how to wash the pads. Overall, it works well just to hang it up to dry. Also, it works excellently on microfiber pads. 

Benefits Of Steam Cleaning

Steam mopping a tile floor is a great way to disinfect its beauty. It also offers several benefits over traditional mops, especially when it comes to the health of your family.

i. It can help get rid of allergies. 

Steam cleaning can help all family members with allergies or asthma. Because it uses natural steam to remove dirt from your home’s surfaces, it won’t make your allergy symptoms worse. Also, it will not cause breathing problems.

ii. There’s no need to worry about toxic chemicals when steam cleaning. 

This method can kill about 99.99% of bacteria without ammonia, bleach, and other harmful substances. All you need is heat and water to rid the house of chemical deposits and pollution.

iii. It helps to eliminate mold

The buildup of mold can lead to dangerous and deadly mycotoxins that can cause various health problems. If you use bleach, the mold is not usually killed but turns white. Meanwhile, steam cleaners attachment bristles that release high-temperature steam. This helps to remove dirt from hard-to-reach areas.

iv. It is a cheaper alternative

This cleaning method can save you a lot of cash in the long run. You can purchase a bit high at first, but the only cost to use your appliance is water and electricity. Apart from additional pads, it does not require any additional agents such as detergents and cleaning agents. It’s also good for your health, which can reduce the frequency of visits to the hospital. 

What Can Cause Damages To Your Tiled Floor?

There are things that are harmful to tiled floor. Below are wrong practices to avoid to prevent your tiles from getting quickly damaged:

i. Frequent steam cleaning

It is not recommended to expose the tile floor to heat and excessive moisture. You may be tempted to clean your tiles more often than usual, but that is not the best way to maintain it. To reduce the risk of damages on your tile, ensure you reduce the use of a steam mop to once a week while vacuuming or use a regular mop for cleaning as often as you want.

ii. Use chemical cleaners

Using chemicals in conjunction with a steam cleaner can indeed wreak havoc on your tiled floor. If the manufacturer does not approve a chemical, stay away from it. Using these chemicals can also clog the steam mop. This can cause the common issue of your shark steam mop, not steaming.

So you have to be cautious with the use of chemicals. It does not matter whether your tiled floor is durable; these chemicals can weaken it. A steam mop, as the name suggests, is best used with water only. The heat from the steam is enough to kill bacteria and dust mites on the floor.

iii. Allowing the water to stand for a long time

Puddles of water on a tiled floor can weaken it as the tiles absorb water through the grout. So if you spill water on your tiled floor, ensure to clean it immediately with a dry absorbent towel or mop.

This is because water weakens the corners of the tiles, which then loosen the adhesive. As simple as it sounds, you should not be tempted to overlook these essential guides. The steam mop is a handy cleaning tool, but how it is used is very important.

Frequently Asked Questions

Does steaming damage tile floors?

Unfortunately, the answer is yes. Steam mopping the tile floor can cause damages to it. Although a tile floor may be the best type of floor best suited to use a steam mop on due to its durability. However, it may not be indestructible. Pay particular attention to the aggressive cleaning properties of the steam mop.

How does a steam mop work on tiles?

With steam mops, you can scrub even the toughest dirt and stains off your tiles. A good steam mop can blow off the dirt from the tile floor and even stretch into the grout of tile to clean and disinfect. This will help keep your floor and joints longer and minimize the spread of germs.

How do you deep clean tile floors?

Baking soda, bleach, hydrogen peroxide, and an eraser can be used to bring your joint back to its natural white color. This works exceptionally well if you use your toothbrush to apply the mixture and rub it deep into the grout for better cleaning.

Final Thoughts

Finally, using a steam mop to clean ceramic tiles on floors and walls will help get rid of the sticky residue that is often left over with traditional floor cleaners. High-pressure steam cleans and sanitize surfaces of tiles without the use of harsh chemicals that can sometimes damage ceramic tiles or grout. 

Also, a steam mop protects your skin from the same harsh chemicals. Steam cleaners can heat water up to 220 degrees Fahrenheit to remove dirt from small gaps and crevices that a conventional mop will leave behind.