( This Post Contains Affiliate Links and We May Receive A Small Commission on Purchases)

How To Make Tile Floor Shine Without Wax

Tile floors are among the stylish flooring options with an increasing market demand. The floors come in a wide range of colors that seamlessly match all elegant interiors. Due to their resistance to abrasion and scouring, floor tiles increase the variety of interior designs and décor.

Therefore tile floors provide patterns and styles that are endless. Hence you can use them in your kitchen, sitting room, bathroom, and any other part of the house. Nevertheless, all tile floors can get dirty and dull when neglected. These floors lose their shine by the presence of stains, dirt, and dust spread over them by shoes. 

Although many people use wax to polish tile floors, there are other ways to polish it without wax. Here are some DIY ways to make tiles shine without the use of wax.

DIY Ways To Make Tile Floors Shine Without Wax

There are different ways to clean your tile floor without using wax. They including the following:

i. Baking Soda Paste

Baking soda (sodium bicarbonate) is commonly used in baking. This is due to its leavening properties. What this means is that it helps the dough rise due to the formation of carbon dioxide. In addition to cooking, baking soda may be used for other household purposes and health benefits.

Sodium bicarbonate can remove stubborn tile and grout stains if the floors look dirty. Little wonder, it is often said that a natural tile polish will enhance the appearance of tile floors. 

So, to use a baking soda paste, you should mix an equal amount of baking soda with warm water. This procedure creates a thick paste. Then dip a soft-bristled brush in baking soda and scrub the grout and tiles.

Leave the baking soda on for up to 10 minutes. Afterward, rinse the tiled floor with warm water. Keep repeating the process on the tile floor until all visible stains are entirely removed.

ii. Soap and Water Solution

In a mop bucket, mix some soap and warm water to create a soapy water solution, and apply it to the tile floor with a mop. The mop should be squeezed well before using it on the floor, and the grout should be changed or replaced when it darkens. 

The entire surface of the tile should be wiped with a soft towel so that the solution is absorbed, and the floor should be checked for shine. For stubborn stains, use a soft brush or sponge to wipe the stain gently, and the floor can be rinsed with clean water if it’s needed.

iii. Ammonia and Water

Ammonia is very good for adding shine and brightness to tiled floors. Also, it’s usually used to get rid of stains and dirt from tiled floors. When using ammonia, you need to mix some of it with warm water in a bucket. Soak a mop in a solution of ammonia and wring it out to get rid of the excess water. 

Wash the floor well to disinfect it. To remove stubborn stains, dip the sponge in the ammonia solution and rub it gently on the tiles. Finally, the ammonia solution should be rinsed with clean water. You should mop the floors to remove any remaining solution.

iii. Vinegar Solution

This natural product is applied on dirty tiles floor to disinfect and clean it safely. Furthermore, vinegar can effectively clean dirty floors without producing harsh fumes. After drying, it leaves a fresh and natural smell. To clean a tile floor with vinegar, you should mix a small amount of vinegar with warm water in a bucket. 

Also, your tiled floor should be vacuumed or dusted to remove loose dirt. After that, you should dip the mop in the vinegar solution and wring it out. Wipe the floor well and let it air dry or clean with a towel to remove any lingering solutions on the tile floor.

If there is a heavy stain on tile floors, lightly spray baking powder on the wet tiles. The next step you take is to scrub the floor with a cloth before cleaning them with a dampened mop. 

Take note, so you don’t mix the vinegar with bleach. Whenever you want to use vinegar, ensure the windows are opened or ventilated because of the vinegar smell.

iv. High Gloss Tile Sealant

If the tiled floor has been cleaned with any natural options, then a high gloss sealant can be applied to the tile floor to enhance its shine. Additionally, a high-gloss tile sealer helps protect tile floors so that they look beautiful for longer.

There are different types of sealants for high gloss tiles, so it is a good idea to choose a product that is designed for one type of tile. Many high gloss sealants are made for stone tiles with porous surfaces instead of ceramic tiles.

If a high-gloss sealant is to be used on ceramic tiles, it must first be tested on a sample tile or in a hidden area to ensure that it binds well. This is because a non-porous ceramic surface can cause problems. 

It should be noted that the adhesive may scratch or fade over time, so the results may not be permanent. If the glue is scratched or faded, the sealant can be peeled off and reapplied to obtain a clean and beautiful tile floor.

How to Remove Cat-Urine Odor From Tile And Grout

Domestic pets, particularly cats, usually leave behind an odor on tiles and grouts. However, cats offer humans company and love. Unfortunately, the cat can pee on your tiles. This can leave behind an odor that lasts anywhere from weeks to even months after the initial accidents.

A variety of issues (both emotional and physical) will cause your cat to urinate out of the litter box; hence a trip to the vet may be appropriate. Regardless of the cause, you can clean the smell of cat urine from tile floors. Here are the following steps to follow:

Step 1. Firstly, take up fresh urine with several paper towels folded in half. Get rid of the dirty paper towels.

Step 2. You should pour undiluted white vinegar into a spray bottle. Sprinkle over the tiles and add the vinegar to it. Rub with a damp cloth. Vinegar is a natural cleanser and deodorant that works to neutralize and remove any odor.

Step 3. The next step is to clean the vinegar off the ground with a dry cloth. Then moist the tiles and add them again with vinegar. Let the vinegar air dry on the floor.

Step 4. You should pour 1 gallon of cold water in a bucket and add a cup of oxygen bleach. After that, dip an old toothbrush into the mixture and scrub the grout thoroughly. Oxygen bleach helps to lighten the grout and also eliminate any urine stains.

Step 5. Finally, ensure you dip a sponge into the mixture and squeeze out the excess liquid. Wipe off the tiles as well as grout with sponge. Then wet a clean cloth with cold water and rinse the mixture off the tiles. Wipe the tiles and clean the grout with a towel.

Frequently Asked Questions

How do you make unglazed ceramic tiles shine?

For glazed tiles, it is better to use mild cleaning agents such as warm water, vinegar lemon juice (3-4 lemons per half a bucket of water). Unglazed tiles are porous. Hence dirt and stains quickly accumulate. This makes the cleaning process difficult. They need effective detergents to have it properly cleaned up.

How can you make your shower tile shine again?

You need to get rid of tough dirt from the surface of the tile to restore back its shine or luster. Regular soap and water do not work effectively against hard water stains and soap scum. Instead, an acidic cleaner capable of cutting through the film is required. After that, applying car wax to the cleaned tile will make the shower tile shine.

How can I make my kitchen tiles shine?

Water and vinegar are the most effective cleaning solution you should use. This solution is great for making your kitchen tile floor shine. So take a bucket and add warm water into it. Then pour about one cup of vinegar after every four to five cups of warm water.

How do you clean and shine tiles?

A quick vacuuming or sweeping process is also useful for removing dust and dirt before getting into the tile or grout. Cleansing with warm water and using a cleaning agent recommended by the manufacturer also improves the shine and color of the tiles.

Final Thoughts

Finally, dirt can get to the tiled floor, often from footwear. When your tile floors are neglected, these dirt builds up. Hence your floors that were once shiny and elegant become untidy, dull, and unattractive.

The con of dirt gathering on tile floors means that you have to clean the floors regularly to maintain their shine. Fortunately, there are natural and homemade cleaning products, as mentioned above, which can make tile floors clean and sparkling without the use of wax.