( This Post Contains Affiliate Links and We May Receive A Small Commission on Purchases)

Steam Clean Concrete Floors

Do you have a concrete floor? And do you often wonder what the right cleaning process is, and how much it takes to maintain it? You would have to wonder no more, as we are going to explore the cleaning process of concrete floors that is steaming.

Concrete floors are not new to the building industry. It is a hard, strong floor that has been used for driveways, streets, even for express roads. It has the strength and potency of a highway. As a flooring material, it can also be used aesthetically for your homes. There are etching techniques, and dyes that turn a grey, mundane concrete into something artistically beautiful. So surprise, your families can do with concrete flooring.

Ways to Steam Concrete Floors

There are different ways to steam clean a concrete floor. Each of the methods works perfectly and does a good job of deep cleaning your concrete floor. The method you choose depends on the location and type of the concrete floor. For instance, high-pressure steam cleaning is advisable for outdoor concrete floors. Each of the methods has been explained in detail below.

Steam Vapor:

This is a type of technique that involves water per hour and heat as its cleaning style. It does not make use of pressure when cleaning. The steam helps to carry heat from the surface to the pores of the concrete. The heat helps in disengaging the soil and drawing the ground to the heat source.

READ  How to Paint a Concrete Floor

High-Pressure Steam:

Unlike the steam vapor, the high-pressure steam like the name suggests requires much pressure to clean, water per minute, and heat as well. This method can be very effective for cleaning concrete flooring.

A “STEAM” VAC:

The unusual thing about this technique is that it does not even require the use of steam at all. It makes use of chemicals, and hot water which is laid down then extracted from the concrete flooring. It is just basically chemical extractions.

Also, it is important to know which steam method to use to achieve the best results. The technique for heavyweight concrete is different from that of lightweight concrete flooring. The steam vapor, high-pressure steam, and steam vac are all effective methods and work best when used in the right proper manner.

There are manufacturer manuals for all these questions. They serve as a guide. If you are in a position where answers can’t be found, you can also try using a particular spot on your concrete flooring as a trial method to see the outcome before proceeding to work on the whole floor.

How To Steam Clean Unsealed and Unpainted Concrete

Step 1

You have to set up your equipment. Use two extension handles and attach a floor brush to your steam cleaner. Also, attach a microfiber towel to the clip of the floor brush.

Step 2

Select an area on your flooring to clean. This cleaning should be lightly done. Watch your floor’s reactions to this to determine if the cleaning is suitable enough to be done everywhere.

READ  How to Remove Carpet Padding From Concrete

Step 3

Clean off the steamed area with a microfiber towel. It is to pick up the dirt, soil, or moisture. This cleaning should be repeated in reverse, and the new move can be made if the selected area is clean to your satisfaction.

Step 4

There might be obstinate stains left after cleaning. These stains do not necessarily mean that cleaning wasn’t properly done; it only just means that cleaning might need to be done again. Do not stay on a stubborn spot for too long. You are to clean, allow It cool for some time then proceed to clean stains also. High-pressure steaming allows for the particles to be raised to the surface then cleaned off with a towel. One sad thing many concrete floor owners tend to forget is that spots can be removed. But stains? Very unlikely. So avoid having colors on your concrete.

How To Steam Clean A Sealed And Painted Concrete

Step 1

You are to set up your cleaning equipment. Filler pads should be placed inside a large floor brush. Cover the floor brush with a floor towel using four clips.

Step 2

The brush should be used back and forth on the floor. The speed on this shouldn’t be fast. Unlike the unsealed and unpainted base, the process isn’t as vigorous.

For a painted concrete floor, make sure to try a spot first before proceeding to do the whole floor. Stubborn stains should be left to cool off before trying again.

How Does Concrete Get Dirty?

The concrete floor is mostly seen as hard, waterproofed, and impenetrable to any form of dirt or stain. It is however untrue, as a base remains a floor. The concrete floor is pious and can be stained. Despite its shiny, smooth look, it is being trodden upon daily. Dirt is being thrown, fluids spilled, and sometimes particles from the outside are also being brought into your home.

READ  Can You Paint a Concrete Floor?

In the long run, this dirt and particles would leave stains or spots that would require cleaning. The two types of concrete floorings each stain differently and require a different cleaning process.

The Unsealed and Unpainted Concrete Flooring

Extremely very permeable and would get dirty very easily. It is, in fact, much worse for an indoor environment. Oil droppings are a huge no for this type of concrete flooring. It is also not easy to clean.

 The Sealed and Painted Concrete Flooring

Due to its sealing, dirt and penetration are not so easy to pass through. This sole reason is why it is advisable to do your sealing properly. It is also easy to work on and clean in cases where stains or dirt would occur.

No flooring is incapable of dirt and stains, so while not entirely unavoidable, you can still do your best to ensure that colors and spots are not easily left on your flooring.

CONCLUSION

Although the clean steam method is not popular, it is effective and useful in taking out spots and stains on your concrete flooring. The concrete flooring is also a great choice for your home, driveways, restaurants, and many more.